The gripping pull-back action to actuate the collet chuck means the work piece will be moved slightly in the Z-Axis. This is normally acceptable for first operation work and the work piece position can easily be determined with a facing cut. The 5C and 16C collets have been designed with a long small nose diameter allowing for good clearance for tooling. All collet closers are case hardened and ground optimising the rigidity, strength and durability.
DCD collet changing gun are required for the changing of DC collets. The gun collapses the collet down so it can be placed into the collet and released into position.
One of the fastest and strongest milling clamps available anywhere, these clamps are easily set up and broken down, making them ideal for odd-shaped parts and short cycle times. The worm-and-gear design ensures that the clamp will not loosen with use...
Stops to be used with free vices CP11. Smooth face more suited to second operation work or when you cannot make the component. Hole parttern suits 50mm grid pattern for use on Leave base plates